Aspects Evaluated When Installing In High Intensity Tower Lighting

By Sandra Brooks


Tall structures need to be marked at night for the safety of aircraft. Therefore, adhering to the federal rules and regulations on the illumination and correct corresponding paints is crucial. Finding a contractor that will install high intensity tower lighting enables one to ascertain this requirement. Safety of the structure is enhanced as well following the enhanced visibility. The effectiveness of the installation process is dependent on the factors below.

The measurements of structures have an influence on the positioning of lights. These dimensions will determine the lights installed at the top. More so, each level will carry a given number of the lights depending on the length. Check on the specifications given on aviation safety guidance. The level of structures will be effectively radiated thus indicating the presence of a structure efficiently.

The approach applied should produce the shape of structures accordingly. The tower or a set of buildings are identified efficiently when they are defined appropriately. Pilots navigate easily in such areas whereby the tall towers are identifiable. Improved visibility evades chances of accidents and surprises considerably. Improper lighting can confuse pilots thereby resulting in clashes that may cost lives and properties. One must adhere to the tower definition rule and install the lights as recommended.

The height of a tower determines the number of lights be installed. This is necessarily the minimum number. As such, consulting with experts to learn on recommended intervals will guide your preparations appropriately. A taller building will, therefore, require more installations than medium ones. The pilots can clearly identify structures from a safe distance thus navigating effectively in remote or metropolitan areas.

Enhance visibility through installing lights on every angle. This factor is imperative in evading blind spots. Ensure that one can identify a structure from any angle in azimuth. This way, chances of helicopter crash are eliminated significantly. Hiring professionals in the installation ascertain that such factors are mulled over efficiently. The possible errors of omitting an angle are evaded. Obstructions are evaded as well to keep a tower visible at all time.

Source of power to lighting components is established. High intensity power source will serve you greatly. Therefore, connecting the building or any given tower to the national grid will assure you of continuous power generation. Nonetheless, there are occasions that grid source is affected by blackouts. Back up sources will compensate the same appropriately. There are numerous approaches to the backup sources depending on their suitability. It is worth noting that using batteries to power the radiators keeps them running continuously.

Kind of tower is evaluated. Obstruction towers are installed with warning lights. These will set alarm to pilots who will evade the tower efficiently. Airport towers are installed while indicating a landing zone which prepares pilots effectively. Additionally, meeting aviation standards in color selection is important as well. Standards colors are chosen to indicate airports. Towers can be market by alternating white and aviation orange for easy identification during the day.

The components used during the installation process must meet quality standards effectively. One will verify this condition by seeking references. A professional can be a good source of information. The expertise and experience gained in this field will have endowed them with necessary information. You are directed to procure efficient materials that will serve you longer.




About the Author: